News Center
2023.07.27
The electric hydraulic pump is a hydraulic device that converts the mechanical energy of the motor into hydraulic energy, and outputs it in the form of pressure and flow. The drive shaft of the hydraulic oil pump is connected to the motor through a connector. When the motor of the hydraulic pump rotates, the drive of the electric oil pump It also rotates synchronously, and drives the cylinder to rotate together through the spline. The motor of the electric hydraulic pump has different voltages, which can be selected according to the demand.
2023.07.27
The working principle of electric hydraulic pump
The electric hydraulic pump is a hydraulic device that converts the mechanical energy of the motor into hydraulic energy and outputs it in the form of pressure and flow. The drive shaft of the hydraulic oil pump is connected to the motor through a connector. When the motor of the hydraulic pump rotates, the drive shaft of the electric oil pump is also Synchronous rotation, and drives the cylinder to rotate together through splines. The motor of the electric hydraulic pump has different voltages, which can be selected according to the demand.
2023.07.27
Precautions for the use of hydraulic crimping pliers
1. Hydraulic tongs are not insulated. When used near the power supply line, be sure to use non-conductive tubing and prepare for personal protection. 2. The hydraulic oil of the hydraulic tongs can easily puncture the skin under high pressure, causing serious injury, decay or even death. If you are injured by the leaking hydraulic oil, please see a doctor immediately. 3. Do not check for oil leakage by hand. When the hydraulic system is pressurized, do not touch the tubing and joints with your hands. The pressure must be removed before maintenance.
2023.07.27
Hydraulic wrench is short for hydraulic torque wrench. It is a professional bolt tightening tool powered by hydraulic pressure and providing large torque output for bolt installation and disassembly. It is often used to tighten and loosen bolts larger than one inch. Hydraulic wrench is composed of working head, hydraulic pump and high pressure oil pipe. Through the high-pressure oil pipe, the hydraulic pump transmits the power to the working head, and drives the working head to tighten or loosen the rotating nut.
2023.07.27
What is a claw type hydraulic jack
In fact, the so-called claw-type hydraulic jack is a claw-type jack, similar to the usual jack function, can help lift heavy objects, help carry out a variety of projects and some simple maintenance. This type of hydraulic jack uses a rigid top as a main working device, so when the general hydraulic jack has no way to operate, it can make the rocker rotate by 270 degrees, so that the whole can reach the specified height and complete a series of work. And when it reaches the limit of height, it will return oil in time, which is also a very convenient working equipment. Before use, we need to use the tube handle to tighten the bolts of the hydraulic valve first, and then carry out the relevant inspection, before the weight can be lifted.
2023.07.27
How to store the hydraulic jack after use
1. When using, first butt the quick connector of the manual pump with the top, then select the position, and tighten the oil drain screw on the oil pump to work. To lower the piston rod, loosen the hand wheel of the manual oil pump slightly counterclockwise, unload the oil cylinder, and gradually lower the piston rod. Otherwise, it will be dangerous if the falling speed is too fast.
Contact
/
Yuhuan Suoli Hydraulic Tools Co., Ltd.
Address:
West of Building 30, Yuhuan Industrial City, Waima Village, Yucheng Street, Yuhuan City, Taizhou City, Zhejiang Province
Tel: +86-13486818355
Tel: 0576-87526745 / 0576-87417769
mailbox: 75897779@qq.com
Copyright?Yuhuan Suoli Hydraulic Tools Co., Ltd. Website Construction: China Enterprise Power Shaoxing SEO Business License